Our standard Boot Liner will protect the base, sides and back of the rear passenger seats.
The method of fitting the Boot Liner will be different for each vehicle; fitting instructions are provided on each individual vehicle page.
There are additional options you can add to the Standard Boot Liner.
The headline price that we quote on the website is for the Standard Boot Liner only.
Photo 1 -
Photo 2 -
If you wish to fold your second row of seats in your vehicle INDIVIDUALLY to accommodate a longer load ADD a Rear Split.
The Rear Split is manufactured with seams in the Boot Liner where the back of the rear seats meet the sides of the vehicle. We will manufacture additional seams to match the “split” in the rear seats. The seams open and close using velcro.
Please note that the photos on this page do not necessarily represent your vehicle- however- we will match the 60/40 or 30/30/30 split of you vehicle.
If you ADD this option, please note that when you fold the rear seats you will need to detach the velcro fastenings at the top of the Boot Liner on the back seats. Folding the seats will expose a small section of the seat back when folded- this is normal and it is due to the position of the seat hinges.
To protect this exposed area we recommend you ADD a Rear Seat Flap (See Optional Extras)
Please note photographs are generic
Photo 1 - Seat Split Folded
Photo 2 - Showing both parts of the rear seats folded.
Photo 3 - Add a Rear Seat Flap (see Optional Extras) to provide additional coverage.
If you wish to fold ALL the second row of seats in your vehicle to accommodate a longer load ADD a Rear Plus.
With the Rear Plus option we manufacture 2 seams in the Boot Liner where the back of the rear seats meets the side of the vehicle. The seams open and close using velcro (see photo 2).
If you ADD this option, please note that when you fold the rear seats you will need to detach the velcro fastenings at the top of the Boot Liner on the back seats. Folding the seats will expose a small section of the seat back when folded- this is normal and it is due to the position of the seat hinges (see photo 4).
To protect this exposed area we recommend you ADD a Rear Seat Flap ( see Optional Extras)
Photo 1 - Standard Boot Liner with Rear Plus Option which allows rear sets to be folded together
Photo 2 -
Photo 3 - Rear Plus with rear seats folded
Photo 4 -
If you need to extend coverage from the boot through the rear passenger area ADD a Boot Liner Extension.
Boot Liner Extensions must be ordered with a Boot Liner, you cannot order this item at a later date because the liner has to have the relevant velcro attached during manufacturing.
The Boot Liner must have a Rear Plus or Rear Split option (see photo 1).
The Boot Liner Extension extends the coverage from the boot (load area/trunk) through the rear passenger area, across the back of the folded rear seats and up the back of the driver/front passenger seats, attaching to the headrests.
* Boot Liner Extensions MUST be ordered with a Rear Plus or Rear Split Boot Liner:
Photo 1 - This simple yet effective item makes your boot twice as big!
Photo 2 - The extension is easily fitted (and removed) by attaching the extension to a strip of velcro conveniently placed at the bottom of the rear seats.
Photo 3 - The front of the extensions fits snugly up to the headrests of the front seats. It is held in place by way of a velcro loop around the four headrests posts.
Photo 4 - The extension DOES NOT provide FULL coverage to the inside of the rear passenger doors (or the sides of the passenger area on a 3 door vehicle).
Photo 5 - When the rear passenger seats are folded it is likely there will be a void. Do not stand heavy items over any void area as they will not be fully supported.
In addition to your Boot Liner you may want to order a Bumper Flap.
The flap is designed to protect the threshold plate and rear bumper from scratches and scrapes when you are loading/unloading your vehicle OR when dogs are getting in/out of the vehicle.
If you order a Bumper Flap we will manufacture a velcro seam across your Boot Liner just inside the entry to the rear of the vehicle (see photo 2).
The Bumper Flap is a rectangle of Boot Liner fabric which fastens to the Boot Liner by velcro.
You attach the Bumper Flap on the Boot Liner when required and can either fold it into the vehicle or detach it and store it elsewhere when you close the tailgate. The edges of the fabric are not bound so that any mud, dirt of water can run off.
Photo 3 -
In addition to a Boot Liner you may wish to order a Rear Seat Flap.
The Flap has two functions: PROTECT the top of your rear seat giving additional protection from drooling dogs for example, and EXTEND the coverage of the Boot Liner when the rear seats are folded (only when you have already ordered a Rear Plus or Rear Split).
Photo 3 - Once attached the Rear Seat Flap sits over the rear headrests and goes down the back of the rear seats.
Photo 4 - If you order a Rear Plus or Rear Split you may also wish to ADD a Rear Seat Flap to extend the coverage of the Boot Liner when the rear seats are folded.
Photo 5 -
* Required Fields
Please take the time to download, read and keep the following important documents.
These documents are in PDF format and requires software to read. If you do not have Adobe Reader installed on your computer, click here to download it for FREE.
It is inevitable that dogs get smelly especially when they get wet.
Hatchbag has developed a quilted blanket style mat which contains activated carbon to absorb and eliminate bad odours.
Tailored to fit inside a Hatchbag Boot Liner the Odour Control Pet Mat has a special finish to repel hair and dirt.
Available in black only.
HatchBed Mats are supplied in pairs, so you always have a spare/clean one.
They are designed and tailored to fit inside the Boot Liner of your vehicle, and have a unique non slip ribbed rubber backing.
They are washing machine and tumble drier suitable.
The HatchBed Mat is recommended by Vets and Pet Care Professionals.
The soft pile if about 25 mm deep (pile will compact with wash and wear).
Only available in charcoal colour.
Photo 1 -Tailored to fit inside the Hatchbag Boot Liner.
Photo 2 - Ribbed non slip rubbed back
Photo 3 - Deep fluffy pile, ideal and comfortable for your pets
Designed to sit over the base of the Hatchbag Boot Liner the Rubber Mat is the suggested choice for heavy use. The top surface is a Penny/Stud design that reduces slip but allows objects to move across the surface without “snagging”. The underside is textured to eliminate any slip between the Boot Liner and the Mat.
Your Order Includes:
We aim to complete manufacture within 6 working days (see our terms and conditions). Order total does not include transport cost, this will be calculated at checkout based on your location.
For illustration purposes the photographs above may show some of the bespoke solutions.
Our Standard Boot Liner will protect the base sides and back of the rear passenger seats. Designed and tailored specifically for each vehicle in Tough, HARD WEARING, Easy to Clean and Maintain PVC fabric which is manufactured on a nylon mesh base.
Our Bootliners are designed to be easy to fit and remove from your vehicle.
Every boot liner is tailored to suit the individual vehicle, we offer over 400 different models. The method of fixing the boot liner in the vehicle does vary from vehicle to vehicle. It is the tailoring that keeps the boot liner in place. To stabilise the boot liner in the vehicle and to keep the sides upright we do use a combination of Velcro Tabs, Nylon Webbing Straps, Magnets and Vehicle Specific Clips.
The method of fitting the boot liner will be different for each vehicle, Fitting Instructions are provided on each individual vehicle page.
These are ADDITIONAL options that you can add to the STANDARD BOOTLINER. The headline price that we quote on the website is for the Standard Boot Liner only – if you wish to add any of the Optional Extras just click the "add" box under the Option that you wish to add, as you click the Total Price in Section 3 will change.
PLEASE NOTE: Where possible we use vehicle specific photographs, however the Optional Extra photo's are generic – don't worry – once you select your vehicle – we have the EXACT pattern.
This site and all contents are ©2003-2015 The Hatchbag Company - email@example.com Telephone: 0151 637 2323